Ideally suited to a variety of Hospitality, retail assistance and control applications, the 12-86-6000 is a small, high specification, POCSAG Table-top, desktop of wall-mounted transmitter utilising the 12-86-5000 paging transmitter printed circuit board. It subsequently inherits all the type approvals of the 12-86 family. It is capable of transmitting text messages directly to pocket pagers, audible or visual alarms or to LCD screens.
-
-
Products
- Table Top Transmitters - UHF (12-86-6000)
Table Top Transmitters - UHF
12-86-6000
The 12-86 range of products can send text messages directly to pocket pagers, LCD's or receivers, providing simpler, lower cost systems .
Using an appropriate receiver, the 12-86-6000, can also be used for a general remote control applications such as turning on lights, disabling alarms etc.
Powered by a standard CR2032 coin cell, the transmitter will operate for more than one thousand transmissions under normal conditions before the battery needs to be replaced.
The units can be programmed with a serial programming cable (purchased separately) or they can be supplied pre-programmed.
Although the 12-86 is a low power transmitter, when used as a call-point paging transmitter a direct line of sight range of up to eight hundred metres can be expected. When used within buildings the range may vary depending upon the environment.
The 12-86-6000 is supplied in a nicely presented angled housing, suitable for tablet-top, desk-top, door or wall mounting.
For configuration software please see the Downloads section.
- UHF operation
- Small, light & neat
- Internal cell battery
- Cost-effective
- Ideal for near distance paging, hospitality, assistance, duress or operation of lights or doors etc.
- Capable of operating on existing in-house paging systems
- 1 or 2 button variants available, each button individually configurable with its own 35-character message
- Simple Telemetry solution or for use with pocket pagers
- Commercial paging solution
Specification
| Frequency Range | 440-470MHz - UHF |
| Frequency Selection | User configurable |
| Power Supply | 3V CR2032 button cell |
| Battery Life | Approx 1000 transmissions Approx 10 years standby |
| Power Consumption | Standby: 100nA Transmit: 45mA |
| Transmit Power | 10mW |
| Channel Spacing | 25kHz |
| Modulation | FSK with NRZ data |
| Deviation | ±4.5kHz |
| Transmit Duty Cycle | Up to 20%; Maximum 30 seconds on time |
| Baud Rate | 512 |
| Message Format | POCSAG |
| Configuration Application | 12-86 Configuration Tool (Avialable for free download from Downloads page) |
| Programming Cable | 12-47-0000 (Board header to DB9) Can be used with a USB to RS232 DB9 Serial Adapter Cable 12-48-0000 (Board header to mini USB) |
| Serial Port | 9600 , N, 8, 1; RS232 |
| Discrete Inputs | 1 or 2 button options |
| RF Connector | Internal aerial |
| Environmental Protection | Not suitable for outdoor use and should be protected from adverse environmental conditions |
| Operating Temperature | -10ºC to +55ºC (+14ºF to +131ºF) |
| Weight | 90g |
| Enclosure Dimensions | 52mm x 99mm x 30mm (WxDxH) |
| Enclosure Material | Plastic |
| Colour | Black |
| Type Approvals | AS/NZS 4769.1:2000 + Amendment 1:2002 (RF) EN 300-224-2 (RF) FCC CFR47 Part 90 (RF) EN 301 489-2 V2.1.0 (EMC) EN 60950-1:2006 (Safety) |
-
Information
The 12-86 range of products can send text messages directly to pocket pagers, LCD's or receivers, providing simpler, lower cost systems .
Using an appropriate receiver, the 12-86-6000, can also be used for a general remote control applications such as turning on lights, disabling alarms etc.
Powered by a standard CR2032 coin cell, the transmitter will operate for more than one thousand transmissions under normal conditions before the battery needs to be replaced.
The units can be programmed with a serial programming cable (purchased separately) or they can be supplied pre-programmed.
Although the 12-86 is a low power transmitter, when used as a call-point paging transmitter a direct line of sight range of up to eight hundred metres can be expected. When used within buildings the range may vary depending upon the environment.
The 12-86-6000 is supplied in a nicely presented angled housing, suitable for tablet-top, desk-top, door or wall mounting.
For configuration software please see the Downloads section.
-
Details
- UHF operation
- Small, light & neat
- Internal cell battery
- Cost-effective
- Ideal for near distance paging, hospitality, assistance, duress or operation of lights or doors etc.
- Capable of operating on existing in-house paging systems
- 1 or 2 button variants available, each button individually configurable with its own 35-character message
- Simple Telemetry solution or for use with pocket pagers
- Commercial paging solution
-
Specifications
Specification
Frequency Range 440-470MHz - UHF Frequency Selection User configurable Power Supply 3V CR2032 button cell Battery Life Approx 1000 transmissions
Approx 10 years standby
Power Consumption Standby: 100nA
Transmit: 45mA
Transmit Power 10mW Channel Spacing 25kHz Modulation FSK with NRZ data Deviation ±4.5kHz Transmit Duty Cycle Up to 20%; Maximum 30 seconds on time Baud Rate 512 Message Format POCSAG Configuration Application 12-86 Configuration Tool
(Avialable for free download from Downloads page)Programming Cable 12-47-0000 (Board header to DB9)
Can be used with a USB to RS232 DB9 Serial Adapter Cable
12-48-0000 (Board header to mini USB)Serial Port 9600 , N, 8, 1; RS232 Discrete Inputs 1 or 2 button options RF Connector Internal aerial Environmental Protection Not suitable for outdoor use and should be protected from adverse environmental conditions Operating Temperature -10ºC to +55ºC (+14ºF to +131ºF) Weight 90g Enclosure Dimensions 52mm x 99mm x 30mm (WxDxH) Enclosure Material Plastic Colour Black Type Approvals AS/NZS 4769.1:2000 + Amendment 1:2002 (RF)
EN 300-224-2 (RF)
FCC CFR47 Part 90 (RF)
EN 301 489-2 V2.1.0 (EMC)
EN 60950-1:2006 (Safety) - Manuals & Downloads